Disclaimer: The information in this site is provided to you as a free service. We strive at ProgramAutoRemote.com to have the most current and accurate information. ProgramAutoRemote.com and its creators assume no responsibility for the accuracy or inaccuracy of the information provided.

spacer

1997 Lincoln Town Car Key Fob Programming Instructions

1997 Town Car

  1. Enter 5-digit permanent entry code into the keyless entry keypad.
    This has to be the factory orginal code the car came with. ( If it is unknown look on trunk hinge for a sticker with code )
  2. Within 5 seconds of pressing last button of code, press the 1/2 button. All doors will lock then unlock confirming you are in programming mode.
  3. Press any button on first Keyless Remote within 5 seconds of pressing the 1/2 button. Locks will cycle to indicate succesful programming.
  4. If you are programming more than one Keyless Remote (Including any exsiting remotes) Press any button on second keyless remote within 5 seconds of previous remote. Locks will cycle again to indicate succesfull programming. (If the keypad light goes out before all remotes are programmed the entire process must be repeated).
  5. Press the 7/8 and the 9/0 buttons simultaneously on the keypad to exit program mode.