Disclaimer: The information in this site is provided to you as a free service. We strive at ProgramAutoRemote.com to have the most current and accurate information. ProgramAutoRemote.com and its creators assume no responsibility for the accuracy or inaccuracy of the information provided.

spacer

1997 Chevrolet Venture Key Fob Programming Instructions

1997 Venture

  1. Remove key from ignition switch.
  2. Remove the MALL PGM fuse, from fuse box
  3. Close all doors.
  4. Turn ignition switch to ACC.
  5. Within 1 second turn the ignition switch to OFF then back to ACC
  6. Open and close drivers door.
  7. A chime will sound indicating you are in programming mode.
  8. Press and hold the LOCK and UNLOCK buttons together until chime sounds twice, about 14 seconds.
  9. Repeat step 8 for any additional remotes.
  10. Remove key from ignition and replace MALL PGM fuse.
  11. Test remotes.